HOW TO USE
Shake well before use. If more than one tin of dye is required to complete the work, mix the tins of dye together to ensure a uniform colour.
Apply the Palette Wood Dye fairly quickly along the grain using a foam applicator or brush. Wipe off excess with a clean, dry, cotton cloth before it dries to even out the colour. On large surfaces, such as floors, avoid overlap marks by working a small section at a time. A second coat may be applied after two hours if a stronger colour is required. More than two coats of dye may affect the final finish.
Always test the product on a spare surface or inconspicuous area for colour, compatibility and end result. Different types of wood produce different results.
Do not mix a water-based dye with a spirit-based dye.Wear gloves to avoid staining your skin.Caution must be taken when using water-based finishes over Palette Wood Dye.Keep brush strokes to a minimum as over brushing may lift out the colour.Do not allow to freeze.