Medium Oak

HOW TO USE

Preparation

Shake well before use. If more than one tin of dye is required to complete the work, mix the tins of dye together to ensure a uniform colour.

Application

Apply the Palette Wood Dye fairly quickly along the grain using a foam applicator or brush. Wipe off excess with a clean, dry, cotton cloth before it dries to even out the colour. On large surfaces, such as floors, avoid overlap marks by working a small section at a time. A second coat may be applied after two hours if a stronger colour is required. More than two coats of dye may affect the final finish.

Important

Always test the product on a spare surface or inconspicuous area for colour, compatibility and end result. Different types of wood produce different results.

Precautions

Do not mix a water-based dye with a spirit-based dye.Wear gloves to avoid staining your skin.Caution must be taken when using water-based finishes over Palette Wood Dye.Keep brush strokes to a minimum as over brushing may lift out the colour.Do not allow to freeze.